Panasonic PV-DV901 - Manual (Page 14)

L
2:51:32PM -► 2:51:32PM
OCT 1 2001 OCT 1 2001
Ь2
-lllllllllliTHi»-
Turning on/offthe Palmcorder and selecting
Modes
Turn on the power first and then select Modes.
|How to Turn on the Power
1 Set the [OFF/ON/MODE] Switch to [ON] while pressing the
center Button O-
• The [CAMERA] Lamp lights up.
|How to Switch Modes
2 Slide the [OFF/ON/MODE] Switch.
• With each slide of the Switch, the Mode switches in the order of Camera
Mode, VCR Mode, and Card Playback Mode.
• The appropriate Mode Lamp lights up.
BHow to Turn off the Power
3 Set the [OFF/ON/MODE] Switch to [OFF] while pressing the
center Button.
Using the Viewfinder
Before using the Viewfinder, adjust the field of view so that the displays inside
the viewfinder become clear and easy to read.
1 Slide the Viewfinder backward and then tilt it upward.
• The Viewfinder angle is adjusted upward.
2 Adjust by sliding the Eyepiece Corrector KnobO-
Using the LCD Monitor
With the LCD Monitor open, you can also record the picture while watching it.
1
2
Turn the [OFF/ON/MODE] Switch to [ON].
Press the [PUSH OPEN] Button and, at the same time, bring
out the LCD Monitor about 90° in the direction of the arrow.
• The Viewfinder goes off.
3 Adjust the LCD Monitor angle according to the desired
recording angle.
• The LCD Monitor can rotate a maximum of 180 ° Ф from the vertical
position to the upward direction and a maximum of 90° © to the
downward direction. Forcefully rotating the LCD monitor beyond these
ranges will damage the Palmcorder.
Closing the LCD monitor
Push the LCD Monitor until the [PUSH OPEN] Button is securely locked.
■ Adjusting Brightness and Color Level
When [LCD/EVF SET] on the [DISPLAY SETUP] Sub-menu is set to [YES],
the following items are displayed.
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD screen.
LCD Color Level [LCD COLOR]
Adjusts the color saturation of the image on the LCD screen.
Brightness of the Viewfinder [EVF BRIGHTNESS]
Adjust the brightness of the image in the Viewfinder,
1 Press the [PUSH] Dial and select the item you want to adjust.
2 Rotate the [PUSH] Dial and increase or decrease the number
of the vertical bars on the Bar Indication.
• The Bar Indication has 8 steps. A larger number of vertical bars
indicates stronger brightness'or color saturation.
Increasing the Brightness of the Entire LCD Monitor
Set the [LCD MODE] on the [DISPLAY SETUP] Sub-Menu to [BRIGHT].
• These adjustments do not affect the recorded images.
14
For assistance, please call : 1-800-211-PANA(7262) or
send e -mail to : consumerpraducts
©Panasonic com