CANOGA PERKINS 9145E10G NID Software Version 1.0 - Manual (Page 70)

9145E10G NID Software User’s Manual Port Information
Port Configuration
58
5.2.3 VLAN Configuration
From the Port Configuration menu, select VLAN Configuration (3) and press Enter. The VLAN
Configuration screen (Figure 5-6.) opens. Use the VLAN Configuration menu to display and con-
figure the VLAN parameters. When all VLAN functions have been set, press Esc to return to the
Port Configuration menu.
Figure 5-6. VLAN Configuration Menu
5.2.3.1 VLAN Rules
From the VLAN Configuration screen, select VLAN Rules (1) and press Enter to access the
VLAN Rules screen. Use the VLAN Rules screen (Figure 5-1) to configure the VLAN parameters
listed below.
Type the item number to change and press Enter. Use Tab or Enter to change columns. Use the
Space Bar to cycle between Yes and No. Type VLAN IDs and Priorities into the designated
areas. Press Enter to accept changes. When all VLAN parameters have been set, press Esc to
return to the VLAN Configuration menu. NOTE: Service frames do not include traffic destined to
the 9145E10G Management host.
1. Drop Untagged Packets? - The 9145E10G will discard all Service frames received on
the User or Network port that do not have a VLAN Tag. Selecting Yes discards packets.
2. Drop Packets with VLAN Tag not matching VLAN Tag A? - The 9145E10G discards
all Service frames received on the User or Network port that do not have a VLAN Tag
matching VLAN Tag A. Selecting Yes discards packets.
Canoga Perkins Corp. Ethernet Network Interface Device 04-JAN-2010
9145E10G-527-2-0 V01.00 F31 01:45:14
-------------------------------VLAN CONFIGURATION------------------------------
1) VLAN Rules
2) Port VLAN ID Translation Table
3) P-Bit Translation Table
Select [1-3]:
------------------------------------Messages-----------------------------------