Figure 3-16. edit user account screen – CANOGA PERKINS 9145E10G NID Software Version 1.0 User Manual
Page 43
System Configuration
9145E10G NID Software User’s Manual
Account Configuration
31
Figure 3-16. Edit User Account Screen
1. Username - The name of the new account you wish to add to the user list. Enter a name
of up to 10 characters.
7. Account State - Specifies whether the account is active. Use Space to cycle between
Enabled and Disabled.
8. Access From - Determines from where the user can access this account. Use Space to
cycle between UI, SNMPv3, and UI/SNMPv3.
NOTE:
SNMP only cannot FTP.
9. Access Level - Specifies the security level required to access this account. Use the
Space Bar to cycle between Observer, Operator, and Supervisor.
10. Description - Term used to describe the account type. Enter descriptive text up to 17
characters.
11. UI Password - A password is only required if Access From is set to UI or UI/SNMPv3.
Type the desired password and press Enter. Reenter the password. Passwords are lim-
ited to 15 characters.
12. UI Password Expires -Determines whether the password will expire and required to be
changed. Use the Space Bar to select Yes or No.
Password Expires in (days) - Establishes the number of days each password can be used
before a new password is required. Enter a number between 1 and 365. A setting of 0 will require
a new password each time the account is opened.
13. Allow UI Lockout Of User - Gives Supervisors the ability to lock users out of the system.
Use the Space Bar to select Yes or No.
Canoga Perkins Corp. Ethernet Network Interface Device 04-JAN-2010
9145E10G-527-2-0 V01.00 F31 01:45:14
----------------------------------EDIT USER ACCOUNT----------------------------
Username : Obs
1. Account State : Enabled
2. Access From : UI/SNMPv3
3. Access Level : Operator
4. Description :
5. UI Password : ***************
6. UI Password Expires : No
UI Password Expires in (days) : 0
7. Allow UI Lockout Of User : Yes
8. Allow UI Logout Of User : Yes
9. UI Login Locked State : Unlocked
10. SNMPv3 Authentication Protocol : None
11. SNMPv3 Authentication Password : N/A
SNMPv3 Authentication Key : N/A
12. SNMPv3 Privacy Protocol : None
13. SNMPv3 Privacy Password : N/A
SNMPv3 Privacy Key : N/A
Select [1-13]:
-----------------------------------Messages------------------------------------