CANOGA PERKINS 9145E10G NID Software Version 1.0 - Manual (Page 49)

System Configuration 9145E10G NID Software User’s Manual
SNTP Client Configuration
37
Figure 3-19. SNTP Client Configuration Screen
1. SNTP Client UTC Offset (hours) - Set the difference, in hours, between the local time of
the 9145E10G and Coordinated Universal Time (UTC), which is similar to Greenwich
Mean Time (GMT); Range is -12 to 12
2. SNTP Client Observe DST - Enables/Disables Daylight Savings Time (Summer Time)
and the date and time it starts and ends.
3. SNTP Client Sync Interval (minutes) - Set how often, in minutes, that the 9145E10G
tries to synchronize its time to the SNTP server; Range is 0 (attempt to synchronize at
bootup, only) to 1440 (once daily)
4. SNTP Client Delay Time (seconds) - Sets the delay for the initial SNTP request. If not
zero, the request will be sent at a random interval within the delay time. This is used to
prevent multiple NID requests at the same time in the event that all NIDs power down and
power up at the same time.
5. SNTP Server IP Address - Two SNTP servers can be configured
• IP Address: Set the address for the SNTP server. IP address 0.0.0.0 indicates no
server.
• Retries: How many times the 9145E10G tries to synchronize before trying the alter-
nate server. Range is 0 to 10
• Timeout (seconds): Wait period between unsuccessful attempts. Range is 1 to 30
• Priority: Set which server to contact first. Range is 1 to 255 with 1 the highest priority
and 255 the lowest. If the priority is the same for the two servers, the 9145E10G alter-
nates tries between the servers.
When entries are completed, press Esc to return to the System Configuration menu.
Canoga Perkins Corp. Ethernet Network Interface Device 04-JAN-2010
9145E10G-527-2-0 V01.00 F31 01:45:14
-------------------------SNTP CLIENT CONFIGURATION-----------------------------
1. SNTP Client UTC Offset (hours) : 0
2. SNTP Client Observe DST : Disabled
SNTP Client DST Starts At : 01/01/1970 00:00
SNTP Client DST Ends At : 01/01/1970 00:01
3. SNTP Client Sync Interval (minutes): 5
4. SNTP Client Delay Time (seconds) : 0
5. SNTP Server IP Address 1 : 0.0.0.0
SNTP Server Retries 1 : 3
SNTP Server Timeout 1 (seconds) : 5
SNTP Server Priority 1 : 1
6. SNTP Server IP Address 2 : 0.0.0.0
SNTP Server Retries 2 : 3
SNTP Server Timeout 2 (seconds) : 5
SNTP Server Priority 2 : 1
Select [1-6]:
-----------------------------------Messages------------------------------------