CANOGA PERKINS 9145E10G NID Software Version 1.0 - Manual (Page 28)

9145E10G NID Software User’s Manual System Configuration
IP/SNMP Agent Configuration
16
Figure 3-5. Host Access Table Menu
5. Cycle through the SNMP Access parameters Read, Write, or None using the Space Bar.
Press Enter to select the parameter.
6. Cycle through the SNMP Protocol parameters V1/V2c/V3, V1/V2c, or V3 using the Space
Bar. Press Enter to select the parameter.
7. Type in the desired V1/V2c Read Community and press Enter.
8. Type in the desired V1/V2c Write Community and press Enter.
9. Use Space to scroll through the V1/V2c Access Levels (Operator, Supervisor, or
Observer). Press Enter to select desired setting.
10. Press Esc to return to the Host Access Table menu.
Canoga Perkins Corp. Ethernet Network Interface Device 04-JAN-2010
9145E10G-527-2-0 V01.00 F31 01:45:14
--------------------------------HOST ACCESS TABLE------------------------------
Managing Host Telnet FTP SNMP SNMP V1/V2c Rd V1/V2c Wr V1/V2c
IP/Mask Bits Access Access Access Protocol Community Community Access
172.016.000.000/16 All All Write V1/V2c/V3 public private Superv
Select [(A)dd, (D)elete, (E)dit, (M)ore]:
------------------------------------Messages-----------------------------------