CANOGA PERKINS 9145E10G NID Software Version 1.0 - Manual (Page 36)

9145E10G NID Software User’s Manual System Configuration
Trap Configuration
24
3.2 Trap Configuration
Trap configuration defines how various alarms events are handled. Traps can be configured to be
logged, sent to the SNMP managers in the Trap Notification/Destination Table, or both logged
and sent for each event. Traps can also be set to Disabled.
Trap Config Item Traps Affected MIB Location
Master Trap Control All
User Port Link Traps linkUp (User Port) ifmib.my
linkDown (User Port) ifmib.my
Network Port Link
Traps
linkUp (Network Port) ifmib.my
linkDown (Network Port) ifmib.my
Remote Fault Traps cp9145E10GPortRemoteFaultReceived cp9145E10GStatus.my
cp9145E10GPortSendingRemoteFault cp9145E10GStatus.my
cp9145E10GPortRemoteFaultCleared cp9145E10GStatus.my
Link Loss Forwarding
Traps
cp9145E10GPortLLFActivated cp9145E10GStatus.my
Cold Start Traps coldStart v2-mib.my
Authentication Traps cpAuthenticationFailure cpMgmtStatus.my
Diagnostic Traps cpPortLoopbackOn cpLoopback.my
cpPortLoopbackOff cpLoopback.my
Entity Configuration
Traps
entConfigChange EntityMib.my
Fan/Power/
Temperature Traps
cpMainBoardVoltageLevelsOK cpStatus.my
cpMainBoardVoltageLevelsOutOfRange cpStatus.my
cpDyingGasp cpPowerSupply.my
cpPowerSupplyFailed cpPowerSupply.my
cpPowerSupplyOverHighLimit cpPowerSupply.my
cpPowerSupplyUnderLowLimit cpPowerSupply.my
cpPowerSupplyOK cpPowerSupply.my
cpFanOK cpFanStatus.my
cpFanSlow cpFanStatus.my
cpFanFailed cpFanStatus.my
cpTemperatureOverHighThresholdAlarm cpStatus.my
cpTemperatureHighThresholdAlarmCleared cpStatus.my
cpTemperatureWarningApproachingHigh-
Threshold
cpStatus.my