CANOGA PERKINS 9145E10G NID Software Version 1.0 - Manual (Page 13)

Introduction 9145E10G NID Software User’s Manual
Management Access
1
1.0 About the 9145E10G Software
Building on the industry-leading 10/100/1G 9145E Network Interface Device (NID), the
9145E10G adds10G Speed XFP ports and maintains the same set of features and capabilities
as the 9145E.
1.1 Management Access
The 9145E10G can be managed through any of several access methods.
VT-100 Terminal - The VT-100 terminal is used to manage the NID locally via the EAI-232
serial port. It is primary used to perform initial configurations is the NID before it is connected
to the network.
Telnet - Once the 9145E10G has been connected to your network it can be accessed using
Telnet. All commands and functions are available using standard Telnet software.
SNMP - All commands and functions are also available using an SNMP manager. The
9145E10G supports SNMP v1/v2c/v3 and many standard MIBs as well as CP proprietary
MIBs.
Chapter 1
Introduction