CANOGA PERKINS 9145E10G NID Software Version 1.0 - Manual (Page 17)

Getting Started 9145E10G NID Software User’s Manual
Configuring Terminal Management
5
2.1 Configuring Terminal Management
When using the RS-232 Serial Port for VT-100 sessions, Canoga Perkins suggests that you use
HyperTerminal or another type of terminal emulation software when using a PC.
NOTE:Microsoft Vista OS does not include HyperTerminal. If your PC uses
the Windows Vista operating system, you will need to install a ter-
minal emulation program.
To set up HyperTerminal on your PC.
NOTE: For details on using MS Windows, refer to your MS Windows documentation.
1. Select Start>All Programs>Accessories>Communications>HyperTerminal.
2. At the Connection Description dialog, select an icon and enter the name for the connec-
tion. Click OK.
3. At the Connect To dialog, select the Connect Using menu. Select the COM port and
click OK.
4. Select the Port Settings tab from the COM Properties dialog. Make the following selec-
tions:
a. Bits per second: 9600 bps
b. Data bits: 8
c. Parity: None
d. Stop bits: 1
e. Flow control: None
6. Click OK.
7. Go to File->Properties->Settings and change the Emulation setting from Auto detect to
VT100.
8. HyperTerminal connects to the system and the VT100 terminal emulation starts.
Chapter 2
Getting Started