BendixKing KMD 150 - Pilots Guide - Manual (Page 141)

Rev 3 Aug/2004 KMD 150 Pilot's Guide
127
Line of Discharge Points While Taxiing
Passing over a cable beneath the taxiway can cause a line of discharge
points across the screen as shown in Figure 13-15. Similar concentra-
tions of discharge points across the screen may appear while taxiing due
to electrical signals from nearby equipment such as arc welders or
subway rails. After passing the source of the interference, press the CLR
button.
Figure 13-15 - Line of Discharge Points While Taxiing
Stormscope ® Operation