Waterworks Formwork Deck Mounted Exposed Tub Filler with Handshower and Metal Joystick Handle User Manual

Installation guidelines

PRODUCT SUPPORT 800.927.2120 8am - 6pm EST

FORMWORK

Single Hole Deck Mounted Tub Fillers

INSTALLATION GUIDELINES

Page 1 of 4

4.17.2014

These guidelines have been prepared for the professional contractor to aid in the installation of:
FORMWORK DECK MOUNTED EXPOSED TUB FILLER (STYLE# FMXT30) AND DECK MOUNTED
EXPOSED TUB FILLER WITH HANDSHOWER (STYLE# FMXT50)
All dimensions are based on original specification and are subject to change and variation.
Please consult your Design Associate for current specifications.

Style No.

FMXT30

Style No.

FMXT50

SPECIFICATIONS:

Fitting Hole Diameter: Ø1-1/2"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female Hose Connection
Deck Thickness: 1/4" MIN - 1-5/16" MAX
Water Pressure: 20 psi MIN - 80 psi MAX
Recommended Water Pressure: 45 psi
Restricted Maximum Flow Rate: 2.5 gpm

(FMXT50 Handshower)

IMPORTANT:

¾ To ensure this product is installed properly, you

must read and follow these guidelines. The
owner/user of this product must keep this
information for future reference.

¾ Be sure your installation conforms to federal, state,

and local codes. In the State of Massachusetts, all
installations must comply with the rules and
regulations set forth within 248 CMR.

¾ This product must be installed by a professional

licensed contractor.

¾ Inspect this product to ensure you have all the parts

required for proper installation.

¾ Use only a strap wrench or protected/smooth-jaw

wrench on any finished surface.

¾ The use of certain plumber's putty may stain stone

or tile surfaces.

¾ An access panel must be installed for servicing and

installation.

¾ Install accessible hot and cold service stop valves to

facilitate servicing.

¾ Note: The FMXT50 handshower works

independently of the tub spout. Hot & Cold
connections must be made to both the tub spout
and handshower control separately.

SPOUT INSTALLATION:

SPOUT ASSEMBLY

NUT

METAL WASHER

RUBBER WASHER

SUPPLY HOSES

SPOUT SHANK

RUBBER GASKET