Rice Lake MC Series Mass Comparator, A&D Weighing - MC-30K - Manual (Page 9)

7
2-2. Installing the Balance
Install the balance as follows:
1 Refer to "3. Precautions" for installing the balance.
2 Install the pan support, weighing pan and draft gate.
Refer to the previous page.
3 Adjust the leveling feet to level the balance.
Confirm it using the bubble spirit level.
4 Confirm that the AC adapter type is correct for the
local voltage and power receptacle type.
5 Connect the AC adapter to the balance firmly. Earth
the balance. Warm up the balance for at least 30
minutes with nothing on the weighing pan.
Bubble spirit level
Leveling foot
Grounding
(Earth) To AC adapter
Good No good