Rice Lake MC Series Mass Comparator, A&D Weighing - MC-30K - Manual (Page 13)

11
4. Display Symbols And Key Operation
Key Operations
Key operation affects how the balance functions. The basic key operations are:
"Press and release the key immediately" or "Press the key" are normal operation.
= normal key operation during measurement
"Press and hold the key".
Display
Each key, when pressed or when pressed and held, functions as follows:
Key When pressed and released When pressed and held
Turns the display ON and OFF. The standby indicator is displayed when the display
is turned off. The weighing mode is enabled when the display is turned on. This key
is available anytime. Pressing the key during operation will interrupt the operation
and turn the display OFF.
In the weighing mode, turns the minimum
weighing value ON and OFF.
In the counting or percent mode, enters the
sampling mode.
Enters the function table mode.
Refer to "9. Function Table".
No function at the factory setting.
Switches the weighing units when units other
than “g” are stored in the function setting.
Performs weighing speed adjustment
(response adjustment) and self check.
Performs calibration using the internal
mass. Displays other items of the calibration
menu.
Stores the weighing data in memory or
outputs to a printer or personal computer
depending on the function table settings.
(Factory setting = output)
No function at the factory setting.
By changing the function table:
Outputs "Title block" and "End
block" for GLP report.
Displays the data memory menu.
Sets the display to zero.
Blinking indicators
Weighing data or
stored data
Units
Interval memory
Standby indicator
Comparator indicators
Animal mode indicator
Weighing speed indicator (Response indicator)
Displays the highest-order digit when placing a load of 10 kg
or more on the MC-10K
Displays memory data information
Displays the weighing data relative to the weighing capacity
in percentage, in weighing mode. (Capacity indicator)
Processing indicator
Stabilization indicator
Standby indicator
of power supply
The current data number
Processing indicator
Prior notice indicator
of automatic self
calibration
Interval memory,
active indicator
NET indicator