Updating settings, Applying defaults – Rice Lake CW-90X Over/Under/Washdown Checkweigher - Lantronix MatchPort User Manual
Page 39
Configuration Using Web-Manager
MatchPort b/g™ User Guide
39
Reset to Defaults
(Wireless)
Asserting during bootup for at least 7 seconds resets the
configuration back to factory defaults. Used when network
access is impossible because of improper configuration.
Reset to Defaults
(Ethernet)
Asserting during bootup for at least 7 seconds resets the
configuration back to factory defaults. In addition, the wired
network becomes the default interface. Used when network
access is impossible because of improper configuration.
RS-485 Select
Selects between RS-232 and RS-485 line drivers.
RS-485 2- Wire
Selects 2-wire line drivers. Usable as a half/full duplex
selector.
RS-422/485 4-Wire
Selects 4-wire line drivers
Updating Settings
Click the Apply Settings button from the main menu to save and apply the
configuration changes.
Applying Defaults
Click the Apply Defaults
button from the main menu to apply the factory settings to
the MatchPort. For a list of the default settings, see
on page