Rice Lake CW-90X Over/Under/Washdown Checkweigher - Lantronix MatchPort - Manual (Page 23)

Configuration Using Web-Manager
MatchPort b/g™ User Guide
23
Server Configuration
The unit’s server values display when you select Server from the main menu. The
following sections describe the configurable parameters within the Server
configuration menu.
Figure 4-5. Server Settings
To configure the MatchPort’s device server settings:
1. On the main menu, click Server to open the Server Settings page.
2. Configure or modify the following fields:
Server Configuration
Telnet Password Enter the password required for Telnet access.
Retype Password Re-enter the password required for Telnet access.
Advanced
ARP Cache Timeout When the unit communicates with another device on the
network, it adds an entry into its ARP table. ARP Cache
timeout defines the number of seconds (1-600) before it
refreshes this table.
TCP Keepalive TCP keepalive time defines how many seconds the unit waits
during an inactive connection before checking the connection
status. If the unit does not receive a response, it drops that
connection. Enter a value between 0 and 65 seconds. 0
disables keepalive.
Monitor Mode @ Bootup Select Disable to disable the entry into the monitor mode via
the yyy or xx1 key sequence at startup. This command