Figure 4-13. configurable pins settings – Rice Lake CW-90X Over/Under/Washdown Checkweigher - Lantronix MatchPort User Manual
Page 38
Configuration Using Web-Manager
MatchPort b/g™ User Guide
38
Figure 4-13. Configurable Pins Settings
2. Configure or modify the following fields for each pin:
Function
From the drop-down list, select the purpose of the specified
pin. See
available function.
Direction
Select whether the pin inputs or outputs.
Trigger Input
Select whether the GPIO input signal is to be used as a trigger
condition for email.
Active Level
Select the signal active level (Low or High).
Configurable Pin Functions
General Purpose I/O
Monitors input or controls output by means of the 77F0 port.
Modem Ctrl Channel 1 In
Allows for control of the connection (and disconnection) of
channel 1.
Modem Ctrl Channel 1
Out
Indicates a connection is established on channel 1.
Modem Ctrl Channel 2 In
Allows for control of the connection (and disconnection) of
channel 2.
Modem Ctrl Channel 2
Out
Indicates a connection is established on channel 2.
Serial Channel 1 Status
LED
Indicates channel 1 status and extended diagnostics when the
Diagnostics LED is lit.
Serial Channel 2 Status
LED
Indicates channel 2 status and extended diagnostics when the
Diagnostics LED is lit.
Diagnostics LED
Indicates errors and configurations.