Rice Lake CW-90X Over/Under/Washdown Checkweigher - Lantronix MatchPort - Manual (Page 16)

Using DeviceInstaller
MatchPort b/g™ User Guide
16
Comments Configurable field. Enter comments for the MatchPort. Double-
click the field, type the comment, and press Enter to
complete. This description or comment is not visible on other
PCs or laptops using DeviceInstaller.
Device Family Non-configurable field. Displays the MatchPort b/g’s device
family type as MatchPort.
Type Non-configurable field. Displays the device type as MatchPort
b/g.
ID Non-configurable field. Displays the MatchPort’s ID embedded
within the box.
Hardware Address Non-configurable field. Displays the MatchPort’s hardware
(MAC) address.
Firmware Version Non-configurable field. Displays the firmware currently
installed on the MatchPort.
Extended Firmware
Version Non-configurable field. Displays the full version
nomenclature of the firmware.
Online Status Non-configurable field. Displays the MatchPort’s status as
online, offline, unreachable (the MatchPort is on a different
subnet), or busy (the MatchPort is currently performing a
task).
IP Address Non-configurable field. Displays the MatchPort’s current IP
address. To change the IP address, see
4: Configuration Using Web-Manager or 5: Configuration via
Serial Mode or Telnet Port .
IP Address was
Obtained Non-configurable field. Indicates whether the current IP
address on the MatchPort b/g was set using static or DHCP.
Subnet Mask Non-configurable field. Displays the MatchPort’s current
subnet mask. To change the subnet mask, see
4: Configuration Using Web-Manager or 5: Configuration via
Serial Mode or Telnet Port .
Gateway Non-configurable field. Displays the MatchPort’s current
gateway. To change the gateway, see
4: Configuration Using
Web-Manager or 5: Configuration via Serial Mode or Telnet
Port .
Number of COB
partitions supported Non-configurable field. Displays the number of COB partitions
supported (19).
Number of Ports Non-configurable field. Displays the number of ports on the
MatchPort.
TCP Keepalive Non-configurable field. Displays 1-65s, the MatchPort’s TCP
keepalive range. The default setting is 45.
Telnet Enabled Non-configurable field. Displays True, indicating that the user
can access the MatchPort by means of a Telnet session.
Telnet Port Non-configurable field. Displays the MatchPort’s port for
Telnet sessions.