Rice Lake CW-90X Over/Under/Washdown Checkweigher - Lantronix MatchPort - Manual (Page 10)

MatchPort b/g™ User Guide 10
1 1 : : U U s s i i n n g g T T h h i i s s G G u u i i d d e e
Purpose and Audience
This guide provides the information needed to configure, use and update the
MatchPort b/g
TM
and is intended for software developers and system integrators who
are embedding the unit in their designs.
Chapter Summary
The remaining chapters in this guide include:
2: Introduction Describes the main features of the MatchPort and the protocols it
supports.
3: Using DeviceInstaller Provides information for viewing the MatchPort’s configuration
using DeviceInstaller.
4: Configuration Using Web-
Manager Details configuration using the Web-Manager to set parameters
such as port and server properties.
5: Configuration via Serial Mode
or Telnet Port Provides instructions for accessing Setup Mode (command line
interface) using a Telnet connection through the network or a
terminal or terminal emulation program through the serial port
serial port 1). Details the parameters that you must configure.
6: Configurable Pins Provides instructions for configuring the eight General Purpose I/O
pins.
7: Monitor Mode Provides instructions for accessing and using the command line
interface for monitoring the network and diagnosing problems.
8: Updating Firmware Provides instructions for obtaining the latest firmware and updating
the MatchPort.
9: Wireless Bridging Provides information on the MatchPort wireless-to-Ethernet
bridging feature.
10: Troubleshooting Describes common problems and error messages and provides
information about the diagnostic LEDs. Also provides Lantronix
Technical Support contact information.