Losi LOSB9563 - Manual (Page 41)

LOSB9535 Xcelorin Electronic Speed Control v1.1 Page 41
If you are running in an open area, you will find a smaller percentage will result
in better control.
If you are running in dusty or slippery surfaces, you will more than likely want
to use the lowest option.
• 0% • 15%
• 4% • 20%
• 8% (Default) • 25%
• 10% • 30%
• 12%
Legacy or 2.4GHz – This setting is intended to reflect what type of Radio
System you are using, i.e. Transmitter and Receiver.
Default is LEGACY because there are still many of the traditional 27MHz, 40MHz or 75MHz
systems in use.
If you use a 2.4GHz system
, then you can select this setting.
The Electronic Speed Control internal switching rate is increased with the 2.4GHz selection
and may cause interference with Legacy Radio Systems.