Losi LOSB9563 User Manual
Page 10
LOSB9535 Xcelorin Electronic Speed Control v1.1 Page 10
• The Blue LED will automatically stop blinking should the battery voltage
recover above the Low Voltage Cutoff.
• If the ESC has detected a thermal overload, the Blue and Green LED’s will
blink. Let the ESC cool down.
Setup / Calibration to Transmitter
To perform the setup/calibration between the ESC and Transmitter follow these
steps:
1. Turn on the transmitter.
2. While turning on the vehicle Press and Hold the setup button, notice the
Green LED is now ON solid. When the Green LED is on solid, you can release
the setup button.