Losi LOSB9563 - Manual (Page 38)

LOSB9535 Xcelorin Electronic Speed Control v1.1 Page 38
Motor Timing - This option affects the power band and efficiency (run time) of
an electric motor. The default is “Normal” and is a good starting point to
deliver power and provide good run time.
Low Provide s maximum efficiency with less power. Higher timing produces significantly
more power but at the expense of efficiency (less run time) and typically the motor will
generate more heat. Each brushless motor will respond to timing differently. Good for
running around on paved, or harder surfaces, and racing with high Kv rated or low-turn
motors
Very Low Provides power for running through soft surfaces, having fun and longer run
time.
Normal (Default) Good mix of power and efficiency using any motor.
High More power than efficiency so run time will reduce, and you should be
monitoring motor heat. The higher Kv or lower turn motors will generate heat quickly
using this setting. A safe high temperature range is 165F to 180F (74° - 82° Celsius);
going higher may damage your motor.
Very High This is maximum power and must be used with
caution .
Any motor has the potential to over-heat in this setting. Frequently check the motor
temperature and make sure you’re not operating higher than 165° and 180° Fahrenheit
(74° - 82° Celsius), which may damage your motor, or damage your Electronic Speed
Control (ESC).