Losi LOSB9563 User Manual
Page 39
LOSB9535 Xcelorin Electronic Speed Control v1.1 Page 39
Initial Acceleration - Use this to limit the initial power that is sent to the
motor when starting from a complete stop.
Using the LOW option, the vehicle will launch very slowly and provide the longest run
times. When using the HIGH choice, you will have wheel-spinning acceleration at the cost
of run time. This is also very tough on the batteries as the amperage draw can be very
high. If your vehicle cuts out, hesitates or loses radio control, you should consider setting
this at a lower value.
Low
Using this option will provide longer run times and is easiest on the batteries. It
is a good choice for beginners.
Medium Medium requires more from your batteries, and is good for low traction surfaces.
High
This option will provide full acceleration and requires stout batteries to supply
the load required in this setting.
CAUTION:
You may experience what seems like the motor cutting off, a hesitation or
possible brief radio loss using this setting.