Losi LOSB9563 User Manual
Page 29
LOSB9535 Xcelorin Electronic Speed Control v1.1 Page 29
own risk.
About Tab: Here you will see the Setup software version installed, and date of last
update. This will be helpful information should you have questions or support concerns.
Connection: This section is displayed on every Tab. There are two icons; one for the USB
connection, the other indicates the Electronic Speed Control connection. They are RED in
color when disconnected and GREEN on connection.
Note:
Without an understanding of a specific function and reason, it is not
recommended that you make changes to the “default” configuration. There have been
defaults selected as a direct result of our testing, which was used to establish these
settings. Changing of the configuration will be at your own risk.
Read Settings: Use of this button will read the current Electronic Speed Control (ESC)
configuration and present it on the current tabbed page only.
Send Setting: Use of this button will send (write) the current selected configuration to
the ESC for the current tabbed page only.
Upgrade Firmware: Use of this button will begin the firmware upgrade process. The
following pop up will be displayed, and you need to select the location of the firmware
update file. You may cancel this process here without any effect to the ESC firmware.