Losi LOSB9576 - Manual (Page 7)

LOSB9515 Xcelorin Electronic Speed Control v1.1 Page 7
Braking Percent 30%
Percent Drag Brake 8%
Legacy or 2.4Ghz Legacy
Neutral Deadband 3
Reverse Rotation blank
Throttle Profile Linear
Brake Profile Linear
Overriding the Active Profile
There are three (3) saved profiles within the ESC that were previously
described. To override a setting within the active profile, select a saved profile
that resembles your needs, or make further changes to the current profile.
Review the AQPC and set jumpers to your choice. You must make a choice for
each area of the AQPC, Cutoff Voltage, Brake, Drag Brake, Throttle Limit,
Reverse Throttle Limit and Motor Timing.
For example if you have the ESC active profile set to Profile #3 (Default) and
would like a little more speed but would like nothing else changed, place the
jumpers on the following choices.
Cutoff Voltage - NiMH
Brake - 80%