Losi LOSB9576 - Manual (Page 6)

LOSB9515 Xcelorin Electronic Speed Control v1.1 Page 6
Profile #3 settings (Default) “Low Speed - Beginner”
Cutoff Voltage- No Cutoff (NiMH)
Brake/Reverse Role- Forward with pause then Reverse
Motor Timing- Low
Initial Acceleration- Low **
Drag Brake- 40%
Brake- 60%
Throttle Limit – 60% of Full Throttle
Reverse Throttle Limit – 30%
** AQPC cannot change
NOTE: You must use the supplied Xcelorin Setup Software to access all
features of the ESC.
Initial Profile setting from the Factory
Battery Cut-off NiMH No Cut-Off
Brake / Reverse Forward with pause then Reverse
Throttle Limit 0% (no limiting)
Reverse Throttle Limit 50%
Motor Timing Normal
Initial Acceleration Low