Kontron Medi Client IIA 104 (EOL) - Manual (Page 18)

6. Scope of Delivery Medi Client IIA - Instructions for use (Version 1.03)
6.2. Labels and Product Identification
System Type Part Number Product Identification
2-A0HI-xxxx Medi Client IIA 104 (Medi Client IIA with a 10.4" display) Medi Client IIA
2-A0HJ-xxxx Medi Client IIA 150 (Medi Client IIA with a 15" display)
The type label with the corresponding product part number is at the rear side of the system. These part numbers
correspond to the part numbers for Certification testing by UL, and other certifying agencies.
On the type label of your system is an alphanumeric characters combination (MN) according to the ordered system
configuration (the /"xxxx"/ group of the MN defines the system configuration).
The inspection status label and the type label (product designation, serial number) are located on the rear side of the
device.
16 www.kontron.com