Elecraft KXPA100 Manual - Manual (Page 44)

44
Cable Schematics
KX3-KXPA100 Adapter Cable
The adapter cable provides efficient integration of the KX3 transceiver, the KXPA100 amplifier and the
KXAT100 Antenna Tuning Unit (ATU). It is available from Elecraft as part of an adapter cable set (see KX3 to
KXPA100 Adapter Cable Set (KXPACBL) on page 8).
The 3.5 mm connector plugs into the ACC1 jack on the KX3, and the 2.5 mm connector plugs into the ACC2
jack on the KX3. A CAT6 cable connects the RJ45 connector to the CONTROL jack on the KXPA100.
See Amplifier Connections using the KX3 to KXPA100 Adapter Cable on page 13 for details about using the
Adapter Cable.
Figure 13. KX3-KXPA100 Adapter Cable.