EFCO 433 Series - Manual (Page 9)

June 2012 PART NO. Y017 Page 9 of 90
Series 433 Triple Set Installation Instructions
SECTION II: Parts Identification Chart
Drawings on this page are not to scale.
Setting Blocks:
HN64
Setting Block @ Adjustable
Sidelite Horizontal (16D9)
HN92
Setting Block @ Horizontals
(including 8373 Door Header)
HN38
Setting Block @ Applied
Transom Glass Stops 8377 &
8378
HN32
Setting Block @ Sill
(or Applied Transom Glass
Stops 9123)
K918
LH or RH C.O.C. Header Shear Block
Pkg. for Pivots, Butts or Cont. Hinge
Use w/ 9227, 9234 or 2556
KN53
Shear Block Pkg. for 90 
Structural Glaze Corner @ Sill
Use w/8475
Shear Blocks:
K919
RH STD Door Header Shear Block Pkg.
for Pivots, Butts or Cont. Hinge
Use w/8373
K923
LH STD Door Header Shear Block Pkg.
for Pivots, Butts or Cont. Hinge
Use w/8373
K924
Shear Block Pkg. for Center-
Set Horizontal/Head
Use w/8372
K925
Shear Block Pkg. for Offset
Horizontal/Head
Use w/8363,8366,8385 or 8393
K926
Shear Block Pkg. for
Center-Set Sill
Use w/8375
K927
Shear Block Pkg. For
Offset Sill
Use w/8362 & 8384
Use (2) w/4G31, 4G32 & 4G33
KN52
Shear Block Pkg. for 90  Structural
Glaze Corner @ Head/ Horizontal
Use w/8475
KN67
Shear Block Pkg. for
Center Set Head
Use w/4369
KN91
Shear Block Pkg. for 4 ½”
Horizontal/Head
Use w/4G30 & 4G29
KN69
Shear Block Pkg. for 4 ½”
Center-Set Horizontal/Head
Use w/3G45
KN92
Shear Block Pkg. for
2-Piece Rolld Horizontal
KN73
Shear Block Pkg. for Offset
Vertical to Horizontal thru
Attachment
KN74
Shear Block Pkg. for Center Set
Vertical to Horizontal thru
Attachment