EFCO 433 Series - Manual (Page 76)

June 2012 PART NO. Y017 Page 76 of 90
Series 433 Triple Set Installation Instructions
SECTION IX: Glazing
(Includes Offset and Center-Set Glazing)
Step 2) Glass Size Formulas
For captured glazing variations, the glass size formula is DLO + 7/8". For structural
glaze systems the glass size formula is DLO + 1 1/2”. The glass size formula from
captured mullion to SSG mullion is DLO + 1 3/16". From SSG mullion to SSG mullion
the glass size formula is DLO + 1 1/2". Captured mullions have a glass bite of 7/16".
SSG mullions have a glass bite of 3/4". 90° SSG corners use offset glass with the
interior glass size and the exterior glass size being different (see Figure 94). Refer to
Figures 93, 94, and 95 below.
4 ½” SILLS &
HORIZONTALS
SIMILAR
VERTICAL GLASS SIZE DOES NOT CHANGE WHEN SSG MULLIONS ARE USED.
Note that the 90° SSG mullions
have glass that utilizes dual
width glazing. Glass sizes
should be specified using the
interior & exterior glass
formulas shown in Figure 94.
D.L.O.
GLASS SIZE
D.L.O. + 7/8"
7/16"
7/16"
D.L.O.
7/16" 7/16"
7/16"
D.L.O.
GLASS
GLASS
D.L.O.
GLASS
SIZE
D.L.O. + 7/8"
7/16"
D.L.O.
D.L.O.
GLASS
SIZE
D.L.O. + 7/8"
7/16"
7/16"
7/16"
GLASS
SIZE
D.L.O. + 7/8"
GLASS SIZE
D.L.O. + 7/8" GLASS SIZE
D.L.O. + 7/8"
D.L.O.
GLASS SIZE
D.L.O. + 1 3/16"
7/16"
3/4"
D.L.O.
GLASS SIZE
D.L.O. + 1 1/2"
3/4"
3/4"
D.L.O.
7/16"
7/16"
D.L.O.
INT. GLASS SIZE
D.L.O. + 1 3/4"
EXT. GLASS SIZE
D.L.O. + 2 1/2"
3/4"
GLASS
GLASS
GLASS GLASS
7/16"
1"
3/4"
GLASS
GLASS
Customer / Installer Note:
EFCO setting blocks are typically 4" in length with
different depths. If the glazing infill is "NOT BY EFCO"
and glazing sizes are larger than 40 square feet, then
the glazing details must be reviewed by the glazing
manufacturer for proper setting block size.
[FIG. 93]
[FIG. 94]
[FIG. 95]