Weather seals: glazing gaskets, Drill jigs, Series 433 triple set installation instructions – EFCO 433 Series User Manual
Page 10: Wa04, Wq02, W138, W104, W164, W166, W165

June 2012
PART NO. Y017
Page 10 of 90
Series 433 Triple Set Installation Instructions
SECTION II: Parts Identification Chart
Drawings on this page are not to scale.
WA04
Standard Weather Seal
@ Subframes 1510 & E178
WQ02
Optional Weather Seal
@ Subframes 1510 & E178
W138
Standard Weather Seal
@ Door Stops
W104
Standard Weather Seal
@ Expansion Mullion and
Adjustable Sidelite
Weather Seals:
Glazing Gaskets:
W164
Standard Glazing Gasket
1” Infill @ 1” Pocket
W166
Glazing Gasket for
Oversized Glass 1 1/16”
Infill @ 1” Pocket
W165
Glazing Gasket for
Undersized Glass 3/4” Infill
@ 1” Pocket
W166/W164
Glazing Gasket for Undersized
Glass 7/8”-15/16” Infill @ 1”
Pocket-Use W165 Exterior
and W164 Interior
WM80
Tape for
SSG Mullions
WM10
Tape for 90
・・・・・
SSG Mullion
W115
Glazing Gasket for 2-
Piece Rolled Framing
@ 1” Pocket
W161
Adjustable Sidelite
Gasket at Sill
Drill Jigs:
DJ12
Offset Glazing Head &
Horizontal Drill Fixture
DJ13
Offset & Center-Set
Sill Drill Fixture
DJ14
Shear Block Drill Fixture for
Vertical Fabrication
DJ15
Screw Spline Drill Fixture for
Vertical Fabrication
DJ22
Dead Load Support Pin
Drill Fixture
DJ26
Shear Block Drill Fixture for
4 ½” Horizontals
(Center-Set & Offset)
DJ24
Screw Spline Drill Fixture for
4 ½” Offset Horizontals
DJ23
Shear Block Drill Fixture for
4 ½” Center-Set Horizontals
DJ25
Shear Block Drill Fixture for
4 ½” Center Set & Offset
Horizontals