Head & sill splicing, Head and sill splicing – EFCO 433 Series User Manual

Page 85

Text mode
Original mode

June 2012

PART NO. Y017

Page 85 of 90

Series 433 Triple Set Installation Instructions

SECTION IX: Glazing

Head and Sill Splicing

Splicing of the head and sill is to be placed at mid D.L.O., at a maximum of 20'-0".
Ensure that the end cuts are square, clean of burrs or sharp edges, and clean of all

cutting oils or other contaminants. Space head and sill 1/2" apart at the required splice
area. Fill the splice joint gap with a silicone type sealant, and tool smooth to create a

weather tight and cosmetic seal. See Figure 112 for head and Figure 113 for sill.

HN44

1/2"

[FIG. 113]

[FIG. 114]

SEALANT

[FIG. 113]

[FIG. 112]