5 inserting circuit boards – Detex DTX-4300 User Manual
Page 33
2.5 Inserting
Circuit Boards
If it proves necessary to remove or insert the main
circuit board from/into the prox.pad plus control-
ler/keypad, follow the steps below.
1.
Disconnect the back housing of the prox.pad plus
unit from the front keypad/controller.
2.
(When handling the main printed circuit board,
to guard against possible static discharges, hold
the board by its edges with one hand and then
touch a grounded object BEFORE touching the
prox.pad plus unit.)
Remove the main printed
circuit board by pressing the two spring tabs in
the direction of the arrows as shown in Figure 2-6.
Be careful with the wires.
Figure 2-6 Removing/Inserting Printed Circuit
Board
2.5 Inserting Circuit Boards
Chapter 2: Installation
prox.pad plus Install/Program. Manual, PPP, D4b
2-15
Part No. 6105679, Rev. 1.1
- 02D Trim (3 pages)
- 08D Trim (5 pages)
- 01W Trim (2 pages)
- 02W Trim (4 pages)
- C Trim (6 pages)
- 08DM Trim (2 pages)
- 02DM Trim (2 pages)
- 01WM Trim (2 pages)
- 01CM Trim (2 pages)
- 08DN Trim (5 pages)
- 03R Trim for 60 Series (3 pages)
- 02WP Trim (2 pages)
- WSV Trim (4 pages)
- Exit Alarm (7 pages)
- Electric Signal Switching (1 page)
- Electric Integration (1 page)
- Delayed Egress With Magnetic Lock (7 pages)
- Delayed Egress With Magnetic Lock (16 pages)
- V40 Series Alarmed Rim Exit Devices (16 pages)
- 01P Trim (2 pages)
- 02A Trim (4 pages)
- BN Trim (2 pages)
- V40 ED (13 pages)
- V40 EE (16 pages)
- V50 EE (23 pages)
- V40 EX (1 page)
- AO19-1 Push (10 pages)
- AO19-1 Pull (9 pages)
- AO19-2 Push (11 pages)
- AO19-2 Pull (10 pages)
- AO19-3 (12 pages)
- Keyed Removable Mullions (4 pages)
- ECL-600 (4 pages)
- EAX-3500FK (1 page)
- EAX-4200 (2 pages)
- DTX-2100 (8 pages)
- DTX-2300 (32 pages)
- AT-5200 (2 pages)
- BE-961-1 (3 pages)
- VRA-143-B (10 pages)
- DDH-2250 (3 pages)
- CS-400 Momentary Models (2 pages)
- CS-400 Maintain Models (2 pages)
- DS-1481 (4 pages)