Detex DS-1481 - Manual

Congratulations on the purchase of this quality
security product. This product has been
designed to install easily, perform reliably, and
provide years of trouble free security.
BEFORE PROCEEDING with your installation, please
review the following list of features. If you have any
questions after reading this document please call
TECHNICAL SUPPORT.
SURFACE MOUNTING:
Unit only requires the drilling of (3) holes*
*ANCHORING SYSTEM: (Included)
Uniquely designed optional (4) four pin anchoring system
provides additional support beyond the standard
two tapped mounting holes.
ONE PIECE LOCKING MECHANISM:
Our patent pending locking mechanism only has
one mechanism providing incredible strength,
durability and reliability due to fewer moving parts.
STAINLESS STEEL CONSTRUCTION
FAIL SECURE/FAIL SAFE FIELD SELECTABLE:
Unit is supplied with fail safe spring that is
changed in the field when desired.
1,500,000+ LIFE CYCLE TESTED
3,000+ LBS. HOLDING FORCE
STEEL SPACER:
We supply a 1/8” thick spacer for those installations that
require mounting the strike closer to the panic bar.
In addition, the spacer is used as a template during
installation.
12 THRU 24 AC/DC OPERATING VOLTAGE:
This unit has built in surge and kickback protection.
VOLTAGE PULL IN / HOLD AMPS DUTY SOUND
12DC .566/.217 Intm./Cont. Silent
24DC .253/.099 Intm./Cont. Silent
12AC .509/.181 Intm./Cont. Silent
16AC .402/.149 Intm./Cont. Silent
24AC .215/.087 Intm./Cont. Silent
AVAILABLE FINISHES
US3 - Bright Brass US10B - Dark Bronze
US4 - Satin Brass US26 - Bright Chrome
US10 - Satin Bronze US32D - Satin Stainless Steel
Detex Corporation, 302 Detex Drive, New Braunfels, Texas 78130-3045
(830)629-2900 / 1-800-729-3839 / Fax (830)620-6711
E-MAIL: [email protected] INTERNET: www.detex.com
INSTRUCTIONS FOR DS-1481-630 ELECTRIC STRIKE
SURFACE MOUNT ELECTRIC STRIKE
Questions?
Contact Customer Service at
1-800-729-3839 1
104811 February 8, 2010