Detex V40 EX - Manual

New Braunfels, Texas 78130
Detex Corporation, 302 Detex Drive
(830) 629-2900 / 1-800-729-3839 / FAX (830) 629-6711
during cutting.
Protect wires
Step 2
CUT fillerplate
flush to extrusion.
(2) For high traffic areas an electric through-wire hinge or power transfer is recommended.
Note: (1) Use enclosed waterproof wire connectors.
Drill 1-1/4" Hole
Through Center Guide
Step 3
subassembly and mark.
Slide-in NEW fillerplate
Step 1
Reinstall endcap bracket
and endcap
E-MAIL: [email protected]
INTERNET: www.detex.com
Fasten until
Hand-tight
Endcap Bracket
Adjust for Handing
(LHR shown)
Connection
Open
Closed
Common
Gray
Yellow
Brown
Wire Color
Fillerplate Subassembly
Endcap
Value Series x EX Fillerplate Retrofit Instructions
101310 June 13, 2008
CUT-OFF PROCEDURE
ARMORED CABLE KIT
WIRING OPTIONS
(If Required)
OR
Open
Connection
Closed
Common Brown/Red
Yellow/Red
Gray/Red
Wire Color
EX, EXxW (0.1A)
INSTALL Armored Cable Kit
as shown below
EXV (3A), EXVxW (5A)