Carrier Access 770-0015 AM - Manual (Page 88)

4-32 IP Router - Release 1.8
Profile Directory: Local Profile
DHCP Server/BOOTP Relay
DHCP Server/BOOTP Relay Menu Fields
DHCP Server
Use this field to enable this Router as a DHCP Server. Use the [S PACEBAR ] to select
<Enabled> or <Disabled>. The following fields are available when enabled.
Info: Active Leases
Displays the Active Lease Information below.
Domain Name
This option is used if the DHCP Server is enabled on the DHCP Server/BOOTP Relay screen.
On a LAN network where the Router is the DHCP Server, the Domain Name will be assigned
with IP addressing information to DHCP clients. This value is a maximum of 41 characters.
Start IP Address
If the Router is specified to act as a DHCP server, enter the first valid IP Address the Router
may assign to a DHCP client. This field acts in conjunction with the Number field.
Number
Enter the number of IP Addresses that this Router may assign. This field acts in conjunction
with the Start IP Address field by using a contiguous block of IP Addresses. Range is 1-254.
DHCP
Server/
BOOTP