Carrier Access 770-0015 AM - Manual (Page 158)

6-12 IP Router - Release 1.8
Basic Configuration
SNMP Configuration
SNMP Configuration
When you are finished adding additional Remote Profiles, select elect and
[E
NTER ]. The guide will move onto the SNMP co.
SNMP Communities
Name - Enter a 10 character name.
Address - Enter an IP address (first line) Subnet Mask for second line.
Access - Selection is: , , .
SNMP Trap Destinations
Name - Enter a 10 character name.
Address - Enter an IP address (first line) Subnet Mask for second line.
Location - Selection is: , will have a selection for each Remote Unit that a profile has
been created for.