Carrier Access 770-0015 AM - Manual (Page 83)

IP Router - Release 1.8 4-27
Profile Directory: Local Profile
Advertise Network/Server
The Advertise Network/Server Window can be used in two ways, depending on
which Selected Items mode is chosen:
<Do Not Advertise> Selected Items mode causes the unit to not advertise the learned
network to all remotes if you place an X next to the selected item.
<Advertise> Selected Items mode causes the unit to advertise the learned network to
all remotes if you place an X next to the selected item.
NOTE: Since each network that contains an X next to it consumes a filter,
choose an approach that consumes the least number of filters. With 15
learned networks of which 5 need to be advertised, it uses less filters to
5 networks than to select 10.
NOTE: Each selected network will be counted as a filter. A maximum of
500 filters can be defined on the Router.
Advertise Network/Server Menu Fields
Setup
Use this field to identify which networks or server types you wish to review. Options
are: , and .
Selected Items
With this option selected Networks will advertise to all remote units that
are listed in your Profile Directory.
With this option selected Networks will not be advertised.
Network
This field displays the network address of each network learned from the local LAN. If
this route was added using one of the Static Network windows, “Static Fltr” will appear
before the network address of this entry. If this is not a static route, and has been
selected, “Config Fltr” will appear before the network address of this entry. Only static
routes for the local unit will display on this window.