Carrier Access 770-0015 AM - Manual (Page 77)

IP Router - Release 1.8 4-21
Profile Directory: Local Profile
Filters
Filters Menu Fields
Forward Mode
This field determines what data to pass/not to pass, based on this field value and the filters listed
on the current window. There are two available values which determine how the Router will
handle data to/from the LAN:
<All Frames NOT Matching Filters> any packets matching the filters listed will not be
passed (i.e., pass all frames except those matching the enabled filters).
<ONLY Frames Matching Filters> enabled filters will have the PASS action. All packets
matching the filters listed will be passed to/from the LAN. Any packets that do not match will
be dropped (i.e., will not pass through the Router).
Define Filter
Use this field to choose the appropriate filter type. The filter screens are used to define the actual
filter prior to enabling (adding) it on the current window.
<Custom> see Defining Custom Filters on page 4-22
<Protocol> see Defining Protocol Filters on page 4-23
<Address> see Defining Address Filters on page 4-24
Filter Type
This field value represents the type of filter , or
Source/Destination
This field is active only with an Address Filter.
Filters by Source only.
Filters by Destination only.
Filter by Source and Destination.
Filter Name
This field displays the name the filter has been given.