Filters, Filters -19 – Carrier Access 770-0015 AM User Manual
Page 75
IP Router - Release 1.8
4-19
Profile Directory: Local Profile
Filters
Filters
Use this screen to review currently enabled data filters or to enable new filters. Data
filters are used to determine whether data can be sent or received on the LAN/WAN
based on a specific device, protocol type or defined data string. Data filters must be
defined using the Custom, Protocol and Address Filter screens prior to being enabled
on the current screen. Filters will not be in effect until they are added to this screen.
Once enabled, they will adhere to the value set in the Forward Mode field.
1. Select Configuration
[E
NTER
].
2. Select LAN < Setup -> and press [E
NTER
].
NOTE: Each Custom filter, even if it is not enabled, will count toward the
maximum number of 500 filters.
Profile
Directory
Window