Cabletron Systems 2208 - Manual (Page 94)

Chapter 5: Local Management
Page 5-50 2H22-08R SmartSwitch 2208 User’s Guide
5.13 SYSTEM RESOURCES SCREEN
The System Resources screen, Figure 5-20 , provides information
concerning the processor used in the 2H22-08R and the amount of
FLASH memory, DRAM, and NVRAM that is installed and how much of
that memory is available. This screen also allows you to monitor the
current processor (switch) utilization and the peak switch utilization.
To access the System Resources screen from the Device Specific
Configuration Menu screen, use the arrow keys to highlight the SYSTEM
RESOURCES menu item and press ENTER. The System Resources
screen displays.
Figure 5-20 System Resources Screen
The following briefly explains each field on the System Resources screen.
CPU Type (Read-only)
Indicates the microprocessor used in the 2H22-08R.
Firmware Revision: XX.XX.XX
System Resources
2159-40
BOOTPROM Revision: XX.XX.XX
Flash Memory Installed : X MB
DRAM Installed: XX MB
NVRAM Installed: XX KB
Available: XXXXX Bytes
Available: XXXXX Bytes
Available: XXXXX Bytes
CPU Type: i960 HT 25Mhz
Current Switch Utilization: 66%
Peak Switch Utilization: 75%
Reset Peak Switch Utilization: [NO]
Device Type: 2H22-08R
EXIT
2H22-08R LOCAL MANAGEMENT
Event Message Line
SAVE
RETURN
RETURN