Cabletron Systems 2208 - Manual (Page 39)

2H22-08R SmartSwitch 2208 User’s Guide Page 4-1
CHAPTER 4
TROUBLESHOOTING
This chapter provides information concerning the following:
• Using the LANVIEW diagnostic and status monitoring system
• Troubleshooting network and 2H22-08R operational problems
• Using the RESET button
4.1 USING LANVIEW
The 2H22-08R uses Cabletron Systems built-in visual diagnostic and
status monitoring system called LANVIEW. The LANVIEW LEDs
(
Figure 4-1 ) allow quick observation of the network status to aid in the
diagnosing of network problems. Refer to Table 4-1 for a description of
the LEDs.
For a functional description of the LANVIEW LED on the optional Fast
Ethernet Interface Module (FE-100TX), refer to
Section 4.2 .
Figure 4-1 2H22-08R SmartSwitch 2208 LANVIEW LEDs
NOTE
The terms Flashing, Blinking, and Solid used in the following
table indicate the following:
Flashing indicates an irregular LED pulse.
Blinking indicates a steady LED pulse.
Solid indicates a steady LED light. No pulsing.
CPU LED
Port Status LEDs Network Ports 1-6 Optional Fast Ethernet
Module Ports 7 and 8
7 8 1X 5X 6X 4X 3X 2X 2 1 6 5 4 3
PWR
CPU
COM
RESET 2H22-08R
Power LED
10/100 Mbps Operation
Transmit (TX)
Receive (RX)
Transmit (TX)
Receive (RX)