Cabletron Systems 2208 - Manual (Page 106)

Chapter 5: Local Management
Page 5-62 2H22-08R SmartSwitch 2208 User’s Guide
5.16 BROADCAST SUPPRESSION SCREEN
The Broadcast Suppression screen, Figure 5-23 , allows you to set a
desired limit of receive broadcast frames that are switched out to the other
interfaces.
To access the Broadcast Suppression screen from the Device Specific
Configuration menu screen, use the arrow keys to highlight the
BROADCAST SUPPRESSION menu item and press ENTER. The
Broadcast Suppression screen displays.
Figure 5-23 Broadcast Suppression Screen
NOTES
The Broadcast Suppression screen will not be available if the
operational mode of the device has been set to SECURE FAST
VLAN. This screen may only be used by devices configured to
operate as traditional or 802.1Q switches.
Broadcast frames received above the threshold setting are
dropped.
Firmware Revision: XX.XX.XX
Broadcast Suppression
2159-25
BOOTPROM Revision: XX.XX.XX
1
2
3
4
5
6
7
8
Time Since Peak
999:23:59
999:23:59
999:23:59
999:23:59
999:23:59
999:23:59
999:23:59
999:23:59
Peak Rate
150000
150000
150000
150000
150000
150000
150000
150000
Threshold
150000
150000
150000
150000
150000
150000
150000
150000
Device Type: 2H22-08R
2H22-08R LOCAL MANAGEMENT
Event Message Line
Total RX
12345678910
12345678910
12345678910
12345678910
12345678910
12345678910
12345678910
12345678910
Reset Peak
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
RETURN SAVE EXIT
PORT #