Cabletron Systems 2208 - Manual (Page 75)

General Configuration Screen
2H22-08R SmartSwitch 2208 User’s Guide Page 5-31
Figure 5-14 Clear NVRAM Warning Screen
5. Select YES and the message “CLEARING NVRAM. REBOOT IN
PROGRESS...” displays.
6. The 2H22-08R clears NVRAM and reboots. All user-entered
parameters default to factory settings.
WARNING
174251
YOU HAVE ELECTED TO CLEAR NVRAM. THIS WILL CLEAR
ALL SYSTEM DEFAULTS INCLUDING BUT NOT LIMITED TO
IP ADDRESS, INTERFACE CONFIGURATION, AND COM PORT
CONFIGURATION, THEN RESET THE BOARD.
ARE YOU SURE YOU WANT TO CLEAR NVRAM?
YES NO