Cabletron Systems 2208 - Manual (Page 73)

General Configuration Screen
2H22-08R SmartSwitch 2208 User’s Guide Page 5-29
Figure 5-13 COM Port Warning Screen
3. Use the arrow keys to highlight YES. Press ENTER.
4. If you ENABLED the port, proceed to step 5. If you DISABLED the
port, use the arrow keys to highlight SAVE at the bottom of the screen,
then press ENTER.
5. When the message “SAVED OK” displays, the edits you made are
saved.
6. Use the arrows keys to highlight the Application field.
7. Use the SPACE bar or BACKSPACE to step through the available
settings until the operation you require displays.
Table 5-3 lists the
available settings and their corresponding applications.
!
CAUTION
Exiting without saving causes the message “NOT SAVED --
PRESS SAVE TO KEEP CHANGES” to display. Exiting without
saving causes all edits to be lost.
WARNING
174252
THE COM PORT HAS BEEN RECONFIGURED AND THERE IS NO IP
ADDRESS SET FOR THIS DEVICE. YOU WILL NO LONGER BE ABLE
TO MANAGE THIS BOARD. DO YOU STILL WISH TO RECONFIGURE
THIS COM PORT?
YES NO