Cabletron Systems 2208 - Manual (Page 86)

Chapter 5: Local Management
Page 5-42 2H22-08R SmartSwitch 2208 User’s Guide
5.11 ETHERNET INTERFACE CONFIGURATION
To access the Ethernet Interface Configuration Menu screen shown in
Figure 5-18 from the Device Configuration Menu screen, use the arrow
keys to highlight the ETHERNET INTERFACE CONFIGURATION
menu item, and press ENTER. The Ethernet Interface Configuration
screen displays.
Figure 5-18 Ethernet Interface Configuration Screen
The following section briefly explains each field of the Ethernet Interface
Configuration screen:
Port Type (Read-Only)
Displays the type of physical media supported by ports 1 through 8.
Ethernet Interface Configuration
2159-23
Firmware Revision: XX.XX.XX
BOOTPROM Revision: XX.XX.XX
Device Type: 2H22-08R
2H22-08R LOCAL MANAGEMENT
Event Message Line
RETURN SAVE
Port
Num
1
2
3
4
5
6
7
8
FE-100TX
FE-100TX
FE-100TX
FE-100TX
FE-100TX
FE-100TX
FE-100FX
FE-100FX
Port
Type
Link
Status
Link
Link
No Link
Link
Link
No Link
Link
Link
Current
Oper. Mode
10Base-TFD
100Base-TXFD
100Base-TXFD
100Base-TX
10Base-T
100Base-FXFD
100Base-FX
Desired
Oper. Mode
[Auto-Neg]
[100Base-TXFD]
[100Base-TXFD]
[100Base-TXFD]
[100Base-TXFD]
[100Base-TX]
[100Base-FXFD]
[100Base-FX]
Advertised Ability
100Base-TXFD [100Base-TXFD]
[100Base-TXFD]
[100Base-TXFD]
[100Base-TXFD]
[100Base-TXFD]
[100Base-TX]
N/A
N/A
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
EXIT
Flow Control Admin Status: [ Enabled ]