Cabletron Systems 2208 User Manual
Page 61
General Configuration Screen
2H22-08R SmartSwitch 2208 User’s Guide
Page 5-17
The following briefly explains each General Configuration screen field:
MAC Address (Read-Only)
Displays the physical address of the 2H22-08R.
IP Address (Modifiable)
Displays and allows you to set the IP address for the 2H22-08R. To set the
IP address, refer to
. The IP address can also be set through
Runtime IP Address Discovery as previously described in
Subnet Mask (Modifiable)
Displays the subnet mask for the 2H22-08R. A subnet mask “masks out”
the network bits of the IP address by setting the bits in the mask to 1 when
the network treats the corresponding bits in the IP address as part of the
network or subnetwork address, or to 0 if the corresponding bit identifies
the host. For details about how to change the Subnet Mask from its default
value, refer to
Default Gateway (Modifiable)
Displays the default gateway for the 2H22-08R. This field is not defined
until an appropriate value is entered. For details about setting the default
gateway, refer to
TFTP Gateway IP Addr (Modifiable)
Displays and allows you to set the TFTP Gateway IP address for the
2H22-08R. To set the TFTP Gateway IP address, refer to
.
Device Date (Modifiable)
Contains a value that the 2H22-08R recognizes as the current date. To set
a new device date, refer to
Device Time (Modifiable)
Contains a value that the device recognizes as the current time. To enter a
new time, refer to
.
Screen Refresh Time (Modifiable)
Contains the rate at which the screens are updated. This setting
determines how frequently (in seconds) information is updated on the
screen. To enter a new update time, refer to
.