Cabletron Systems 2208 - Manual (Page 60)

Chapter 5: Local Management
Page 5-16 2H22-08R SmartSwitch 2208 User’s Guide
5.7 GENERAL CONFIGURATION SCREEN
The General Configuration screen, Figure 5-9 , allows you to configure the
system date and time, IP address and Subnet Mask, Default Gateway,
TFTP Gateway IP address, and COM port.
To access the General Configuration screen from the Device
Configuration Menu screen, use the arrow keys to highlight the
GENERAL CONFIGURATION menu item and press ENTER. The
General Configuration screen displays.
Figure 5-9 General Configuration Screen
Firmware Revision: XX.XX.XX
General Configuration
2159-16
BOOTPROM Revision: XX.XX.XX
MAC Address:
IP Address:
Subnet Mask:
Default Gateway:
TFTP Gateway IP Addr:
Device Date:
Device Time:
Screen Refresh Time:
Screen Lockout Time:
Com 1: [ENABLED] Application: [LM]
Clear NVRAM: [NO]
Device Uptime XX D XX H XX M
Device Type: 2H22-08R
EXIT
Operational Mode: [802.1d SWITCHING]
00-00-ID-00-00-00
000.000.000.000
255.255.0.0
NONE DEFINED
0.0.0.0
2H22-08R LOCAL MANAGEMENT
Event Message Line
RETURN SAVE
10/11/1997
14:23:00
30 sec.
15 min.