Cabletron Systems 2208 - Manual (Page 78)

Chapter 5: Local Management
Page 5-34 2H22-08R SmartSwitch 2208 User’s Guide
To establish Community Names, proceed as follows:
1. Use the arrow keys to highlight the Community Name field adjacent
to the selected access level.
2. Enter the password in the field (maximum 31 characters).
3. Press ENTER.
4. Repeat steps 1 through 3 to modify the other community names.
5. Use the arrow keys to highlight the SAVE command at the bottom of
the screen and press ENTER. The message “SAVED OK” displays.
The Community Names are saved to memory and their access modes
implemented.
NOTE
Exiting without saving causes a “NOT SAVED?” message to
display above the SAVE command. Edits are lost if they are not
saved before exiting.