Cabletron Systems 2208 - Manual (Page 105)

Port Redirect Function Screen
2H22-08R SmartSwitch 2208 User’s Guide Page 5-61
5.15.3 Changing the Remap Errors Field
To prevent errored frames from being sent to the destination ports,
perform the following:
1. Use the arrow keys to highlight the [OFF] selection, next to the Errors
field at the bottom of the screen, and press ENTER.
2. Use the arrow keys to highlight the SAVE command and press
ENTER. The changes are saved to memory.
To return to the default setting of [ON], which enables the errored frames
to be sent to the destination ports, perform the following:
1. Use the arrow keys to highlight the [ON] selection, next to the Errors
field at the bottom of the screen, and press ENTER.
2. Use the arrow keys to highlight the SAVE command and press
ENTER. The changes are saved to memory.