Cabletron Systems 2208 - Manual (Page 48)

Chapter 5: Local Management
Page 5-4 2H22-08R SmartSwitch 2208 User’s Guide
5.3.1 Console Cable Connection
Use the Console Cable Kit provided with the 2H22-08R to attach the
management terminal to the 2H22-08R COM port as shown in
Figure 5-1 .
Connect an IBM VT terminal device, running the VT terminal emulation,
to the 2H22-08R as follows:
1. Connect the RJ45 connector at one end of the cable (supplied in the
kit) to the COM port on the 2H22-08R.
2. Plug the RJ45 connector at the other end of the cable into the
RJ45-to-DB9 adapter (supplied in the kit).
3. Connect the RJ45-to-DB9 adapter to the communications port on
the PC.
Figure 5-1 Management Terminal Connection (PC Connection)
RJ45 COM Port
RJ45-to-DB9
PC Adapter
UTP Cable
with RJ45 Connectors
PC
7 8 1X 5X 6X 4X 3X 2X 2 1 6 5 4 3
PWR CPU
COM RESET 2H22-08R