Cabletron Systems 2208 - Manual (Page 58)

Chapter 5: Local Management
Page 5-14 2H22-08R SmartSwitch 2208 User’s Guide
5.6 DEVICE CONFIGURATION MENU SCREEN
The Device Configuration Menu screen, Figure 5-8 , provides access to
Local Management screens. These screens allow you to configure and
monitor operating parameters, modify SNMP community names, set
SNMP traps, configure switch parameters and configure 2H22-08R ports.
To access the Device Configuration Menu screen from the Device Menu
screen, use the arrow keys to highlight the DEVICE
CONFIGURATION menu item and press ENTER. The Device
Configuration Menu screen displays.
Figure 5-8 Device Configuration Menu Screen
NOTE
The SWITCH CONFIGURATION and
SMARTTRUNK CONFIGURATION menu items on the Device
Configuration Menu screen will not display if the operational
mode of the device has been set to SECURE FAST VLAN:
Section 5.7.9 provides instructions for setting the operational
mode.
Firmware Revision: XX.XX.XX
Device Configuration Menu
GENERAL CONFIGURATION
SNMP COMMUNITY NAMES
SNMP TRAPS
SWITCH CONFIGURATION
ETHERNET INTERFACE CONFIGURATION
SMARTTRUNK CONFIGURATION
DEVICE SPECIFIC CONFIGURATION
2251_66
Device Type: 2H22-08R
BOOTPROM Revision: XX.XX.XX
2H22-08R LOCAL MANAGEMENT
RETURN EXIT